Skip to content Skip to navigation menu
Attention! Not all functions of the myDEPRAG portal are supported with the browser you are using.
Drill spindle 104-220-2Product Number:302954C
The performance data relate to the below mentioned air pressure and lubricated supply air.
With oil-free operation, please consider a reduction of power by approx. 10-20%.
show more > show less <
Grinding, Polishing & Drilling Airmotor
Nominal Power 0.17 kW
Turn direction right rotation 
Nominal speed 2000 1/min
Idle speed 4000 1/min
Nominal torque 0.8 Nm
Start torque 1.2 Nm
Stall torque 1.5 Nm
Air consumption (load) 0.3 m³/min
Air pressure 6 bar
Min. inlet hose O.D. / I.D. - / 6 
Working temperature range -20-110 °C
Shaft design collet up to 6.35 mm