ADVANCED LINE Drilling motor 67-0661B16 | Drilling-,Milling-,Grinding Air motor | Vane motors | Air motors

Skip to content Skip to navigation menu

ADVANCED LINE Drilling motor 67-0661B16Product Number:114132G

Send link to this page by e-mail Send question about the product

Motor with external parts in non-corrosive steel.
The performance data relate to the below mentioned air pressure and lubricated supply air.
With oil-free operation, please consider a reduction of power by approx. 10-20%.

show more > show less <

Available

Added to Your Shopping Cart

Specs

Grinding, Polishing & Drilling Airmotor

Nominal Power	0.3 kW
Turn direction	reversible
Nominal speed	90 1/min
Idle speed	180 1/min
Nominal torque	31.8 Nm
Start torque	47.7 Nm
Stall torque	60.4 Nm
Air consumption (load)	0.55 m³/min
Air pressure	6 bar
Min. inlet hose O.D. / I.D.	- / 12
Min. exhaust hose O.D. / I.D.	- / 12
Working temperature range	-20-110 °C
Max. axial force	800 N
Max. radial force (distance a)	350 N
Distance a	80 mm
Shaft design	drill chuck taper B16

Leistungskurve / Performance curve

Drehmoment / torque
(lbf-ft) / (Nm)

Leistung / power
(W) / (hp)

Drehzahl (1/min) - speed (rpm)

	Leistung - power W bar / hp psi		Drehmoment - torque Nm bar / lbf-ft psi
	Leistung - power W bar / hp psi		Drehmoment - torque Nm bar / lbf-ft psi
	max. 1/min / rpm zulässig - permissible		max. Nm / lbf-ft zulässig - permissible