Skip to content Skip to navigation menu
Attention! Not all functions of the myDEPRAG portal are supported with the browser you are using.
ADVANCED LINE Drilling motor 67-016B16RProduct Number:101960H
Motor with external parts in non-corrosive steel.
The performance data relate to the below mentioned air pressure and lubricated supply air.
With oil-free operation, please consider a reduction of power by approx. 10-20%.
show more > show less <
Available
Grinding, Polishing & Drilling Airmotor
Nominal Power 0.85 kW
Turn direction right rotation 
Nominal speed 1800 1/min
Idle speed 3600 1/min
Nominal torque 4.5 Nm
Start torque 6.75 Nm
Stall torque 8.5 Nm
Air consumption (load) 0.85 m³/min
Air pressure 6 bar
Min. inlet hose O.D. / I.D. - / 12 
Min. exhaust hose O.D. / I.D. - / 12 
Working temperature range -20-110 °C
Max. axial force 800 N
Max. radial force (distance a) 360 N
Distance a 80 mm
Shaft design drill chuck taper B16