Skip to content Skip to navigation menu
Attention! Not all functions of the myDEPRAG portal are supported with the browser you are using.
  1. Home
  2. Air motors
  3. Vane motors
  4. BASIC LINE Vane Air motors
  5. BASIC LINE Air motor 63-007F03/S2
BASIC LINE Air motor 63-007F03/S2Product Number:130520C
Send link to this page by e-mail Send question about the product
BASIC LINE Air motor 63-007F03/S2 BASIC LINE Air motor 63-007F03/S2 BASIC LINE Air motor 63-007F03/S2 BASIC LINE Air motor 63-007F03/S2 BASIC LINE Air motor 63-007F03/S2
BASIC LINE Air motor 63-007F03/S2 BASIC LINE Air motor 63-007F03/S2 BASIC LINE Air motor 63-007F03/S2 BASIC LINE Air motor 63-007F03/S2 BASIC LINE Air motor 63-007F03/S2
    BASIC LINE Air motor 63-007F03/S2
    • BASIC LINE Air motor 63-007F03/S2
    • BASIC LINE Air motor 63-007F03/S2
    • BASIC LINE Air motor 63-007F03/S2
    • BASIC LINE Air motor 63-007F03/S2
Motor with robust cast iron housing.
The performance data relate to the below mentioned air pressure and lubricated supply air.
With oil-free operation, please consider a reduction of power by approx. 10-20%.
Low Maintenance: Our QuickVChange vane exchange system allows replacement of vanes without disassembly of the motor within few minutes.
show more > show less <
Available
Specs
Grinding, Polishing & Drilling Airmotor
Nominal Power 0.4 kW
Turn direction reversible 
Nominal speed 730 1/min
Idle speed 1460 1/min
Nominal torque 5.2 Nm
Start torque 7.8 Nm
Stall torque 9.9 Nm
Air consumption (load) 0.6 m³/min
Air pressure 6 bar
Min. inlet hose O.D. / I.D. - / 12 
Min. exhaust hose O.D. / I.D. - / 12 
Working temperature range -20-110 °C
Max. axial force 50 N
Max. radial force (distance a) 240 N
Distance a 20 mm
Shaft design keyed shaft